Recovering from Laboratory-Induced slips and trips causes high levels of lumbar muscle activity and spine loading.

Slips, trips, and falls are some of the most substantial and prevalent causes of occupational injuries and fatalities, and these events may contribute to low-back problems. We quantified lumbar kinematics (i.e., lumbar angles relative to pelvis) and kinetics during unexpected slip and trip perturbations, and during normal walking, among 12 participants (6F, 6 M). Individual anthropometry, lumbar muscle geometry, and lumbar angles, along with electromyography from 14 lumbar muscles were used as input to a 3D, dynamic, EMG-based model of the lumbar spine. Results indicated that, in comparison with values during normal walking, lumbar range of motion, lumbosacral (L5/S1) loads, and lumbar muscle activations were all significantly higher during the slip and trip events. Maximum L5/S1 compression forces exceeded 2700 N during slip and trip events, compared with âˆ¼ 1100 N during normal walking. Mean values of L5/S1 anteroposterior (930 N), and lateral (800 N) shear forces were also substantially larger than the shear force during the normal walking (230 N). These observed levels of L5/S1 reaction forces, along with high levels of bilateral lumbar muscle activities, suggest the potential for overexertion injuries and tissue damage during unexpected slip and trip events, which could contribute to low back injuries. Outcomes of this study may facilitate the identification and control of specific mechanisms involved with low back disorders consequent to slips or trips.

Classifying Diverse Physical Activities Using "Smart Garments".

Physical activities can have important impacts on human health. For example, a physically active lifestyle, which is one of the most important goals for overall health promotion, can diminish the risk for a range of physical disorders, as well as reducing health-related expenditures. Thus, a long-term goal is to detect different physical activities, and an important initial step toward this goal is the ability to classify such activities. A recent and promising technology to discriminate among diverse physical activities is the smart textile system (STS), which is becoming increasingly accepted as a low-cost activity monitoring tool for health promotion. Accordingly, our primary aim was to assess the feasibility and accuracy of using a novel STS to classify physical activities. Eleven participants completed a lab-based experiment to evaluate the accuracy of an STS that featured a smart undershirt (SUS) and commercially available smart socks (SSs) in discriminating several basic postures (sitting, standing, and lying down), as well as diverse activities requiring participants to walk and run at different speeds. We trained three classification methods-K-nearest neighbor, linear discriminant analysis, and artificial neural network-using data from each smart garment separately and in combination. Overall classification performance (global accuracy) was ~98%, which suggests that the STS was effective for discriminating diverse physical activities. We conclude that, overall, smart garments represent a promising area of research and a potential alternative for discriminating a range of physical activities, which can have positive implications for health promotion.

Using smart garments to differentiate among normal and simulated abnormal gaits.

Detecting and assessing an individual's gait can be important for medical diagnostic purposes and for developing and guiding follow-on rehabilitation protocols. Thus, an accurate, objective gait classification system has the potential to facilitate earlier diagnosis and improved clinical decision-making. Systems using smart garments represent an emerging technology for physical activity assessment and that may be relevant for gait classification. The objective of this study was to assess the accuracy of one such system - comprised of commercial instrumented socks and a custom instrument shirt - for differentiating among normal gait and four distinct simulated gait abnormalities. Eleven participants completed an experiment in which they completed several gait trails on a single day. Gait types were classified using diverse modeling approaches (K-nearest neighbors, linear discriminant analyses, support vector machines, and artificial neural networks). High classification accuracy could be obtained, both when classification models were developed and tested using data from each participant separately and grouped together, particularly using the k-nearest neighbor method (>98% accuracy). Some gaits were more often "confused" with other gaits, especially when they shared underlying kinematic aspects. These results support the potential of using "smart" garments for detecting and identifying abnormal gaits, and for future implementation in diagnosis and rehabilitation.

Using a smart textile system for classifying occupational manual material handling tasks: evidence from lab-based simulations.

Physical monitoring systems represent potentially powerful assessment devices to detect and describe occupational physical activities. A promising technology for such use is smart textile systems (STSs). Our goal in this exploratory study was to assess the feasibility and accuracy of using two STSs to classify several manual material handling (MMH) tasks. Specifically, commercially-available 'smart' socks and a custom 'smart' shirt were used individually and in combination. Eleven participants simulated nine separate MMH tasks while wearing the STSs, and task classification accuracy was quantified subsequently using several common models. The shirt and socks, both individually and in combination, could classify the simulated tasks with greater than 97% accuracy. Thus, using STSs appears to have potential utility for discriminating occupational physical tasks in the work environment. Practitioner summary: A smart textile system could classify diverse MMH tasks with high accuracy. This technology may help in developing future ergonomic exposure assessment systems, with the goal of preventing occupational injuries.

Preferred Placement and Usability of a Smart Textile System vs. Inertial Measurement Units for Activity Monitoring.

Wearable sensors and systems have become increasingly popular in recent years. Two prominent wearable technologies for human activity monitoring are smart textile systems (STSs) and inertial measurement units (IMUs). Despite ongoing advances in both, the usability aspects of these devices require further investigation, especially to facilitate future use. In this study, 18 participants evaluate the preferred placement and usability of two STSs, along with a comparison to a commercial IMU system. These evaluations are completed after participants engaged in a range of activities (e.g., sitting, standing, walking, and running), during which they wear two representatives of smart textile systems: (1) a custom smart undershirt (SUS) and commercial smart socks; and (2) a commercial whole-body IMU system. We first analyze responses regarding the usability of the STS, and subsequently compared these results to those for the IMU system. Participants identify a short-sleeved shirt as their preferred activity monitor. In additional, the SUS in combination with the smart socks is rated superior to the IMU system in several aspects of usability. As reported herein, STSs show promise for future applications in human activity monitoring in terms of usability.

Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part II - "Unexpected" effects on shoulder motion, balance, and spine loading.

Adopting a new technology (exoskeletal vest designed to support overhead work) in the workplace can be challenging since the technology may pose unexpected safety and health consequences. A prototype exoskeletal vest was evaluated for potential unexpected consequences with a set of evaluation tests for: usability (especially, donning & doffing), shoulder range of motion (ROM), postural control, slip & trip risks, and spine loading during overhead work simulations. Donning/doffing the vest was easily done by a wearer alone. The vest reduced the max. shoulder abduction ROM by ∼10%, and increased the mean center of pressure velocity in the anteroposterior direction by ∼12%. However, vest use had minimal influences on trip-/slip-related fall risks during level walking, and significantly reduced spine loadings (up to ∼30%) especially during the drilling task. Use of an exoskeletal vest can be beneficial, yet the current evaluation tests should be expanded for more comprehensiveness, to enable the safe adoption of the technology.

Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part I - "Expected" effects on discomfort, shoulder muscle activity, and work task performance.

Use of exoskeletal vests (designed to support overhead work) can be an effective intervention approach for tasks involving arm elevation, yet little is known on the potential beneficial impacts of their use on physical demands and task performance. This laboratory study (n = 12) evaluated the effects of a prototype exoskeletal vest during simulated repetitive overhead drilling and light assembly tasks. Anticipated or expected benefits were assessed, in terms of perceived discomfort, shoulder muscle activity, and task performance. Using the exoskeletal vest did not substantially influence perceived discomfort, but did decrease normalized shoulder muscle activity levels (e.g., ≤ 45% reduction in peak activity). Drilling task completion time decreased by nearly 20% with the vest, but the number of errors increased. Overall, exoskeletal vest use has the potential to be a new intervention for work requiring arm elevation; however, additional investigations are needed regarding potential unexpected or adverse influences (see Part II).

Trunk Motion System (TMS) Using Printed Body Worn Sensor (BWS) via Data Fusion Approach.

Human movement analysis is an important part of biomechanics and rehabilitation, for which many measurement systems are introduced. Among these, wearable devices have substantial biomedical applications, primarily since they can be implemented both in indoor and outdoor applications. In this study, a Trunk Motion System (TMS) using printed Body-Worn Sensors (BWS) is designed and developed. TMS can measure three-dimensional (3D) trunk motions, is lightweight, and is a portable and non-invasive system. After the recognition of sensor locations, twelve BWSs were printed on stretchable clothing with the purpose of measuring the 3D trunk movements. To integrate BWSs data, a neural network data fusion algorithm was used. The outcome of this algorithm along with the actual 3D anatomical movements (obtained by Qualisys system) were used to calibrate the TMS. Three healthy participants with different physical characteristics participated in the calibration tests. Seven different tasks (each repeated three times) were performed, involving five planar, and two multiplanar movements. Results showed that the accuracy of TMS system was less than 1.0°, 0.8°, 0.6°, 0.8°, 0.9°, and 1.3° for flexion/extension, left/right lateral bending, left/right axial rotation, and multi-planar motions, respectively. In addition, the accuracy of TMS for the identified movement was less than 2.7°. TMS, developed to monitor and measure the trunk orientations, can have diverse applications in clinical, biomechanical, and ergonomic studies to prevent musculoskeletal injuries, and to determine the impact of interventions.